HH MZ Mixing amp MZ-140D  5 inp 2 zones 2x140W@100V / min 4 Ohm Matrix HH MZ Mixing amp MZ-140D  5 inp 2 zones 2x140W@100V / min 4 Ohm Matrix HH MZ Mixing amp MZ-140D  5 inp 2 zones 2x140W@100V / min 4 Ohm Matrix HH MZ Mixing amp MZ-140D  5 inp 2 zones 2x140W@100V / min 4 Ohm Matrix HH MZ Mixing amp MZ-140D  5 inp 2 zones 2x140W@100V / min 4 Ohm Matrix HH MZ Mixing amp MZ-140D  5 inp 2 zones 2x140W@100V / min 4 Ohm Matrix HH MZ Mixing amp MZ-140D  5 inp 2 zones 2x140W@100V / min 4 Ohm Matrix HH MZ Mixing amp MZ-140D  5 inp 2 zones 2x140W@100V / min 4 Ohm Matrix

HH MZ Mixing amp MZ-140D 5 inp 2 zones

2x140W@100V / min 4 Ohm Matrix

Varunummer: 131730
Alt. varunr: MZ-140D
BeskrivningExtern Info
Beskrivning

HH MZ Mixing amp MZ-140D  5 inp 2 zones

2x140W@100V / min 4 Ohm Matrix

 

Description

 

The MZ-140D features two individual 140 Watt RMS Class D power amplifiers and each amplifier can be configured to run 70/100 Volt or at minimum 4Ohm impedance. Each amplifier is a zone, and there are front panel controls for volume, two band eq and source select per zone. There are five flexible input channels, each with a front panel mounted gain trim control. Dual combi microphone inputs allow two individual mics to be connected simultaneously both with auto or manual priority modes. Built in a full size 1U rack case, the unit is extremely robust with easily operable controls. Front 'scribble' strips allow the installer to easily identify each zone and input identification. The perfect installation amplifier for retail, leisure, café, bars and halls.

  • 2 Zone amplifier
  • 2x 140 Watts RMS power output
  • Supports 70/100V or min 4 Ohm impedance speaker outputs (configurable per zone)
  • 5 comprehensive audio input channels
  • Independent bass and treble EQ adjustment on each zone
  • Compact space saving 1U design (rack mountable)
  • Universal ~100-240V worldwide operation
  • Remote volume control capability using HH MZ-C2 module and standard ethernet cable

 

System TypeZone power amplifier with input routing
InputsCH1/2 balanced XLR/6.3mm jack combi socket, CH3/4 L&R balanced 3.5mm Euroblock, CH5 3.5mm stereo aux and stereo RCA
Outputs2 zone power amp outputs via 5.08mm Euroblock
IndicatorsPower/Standby, Input signal present and peak LEDs, Output signal present and clip LEDs
ControlsAdjustable gain control for each input; source select and volume control for all zones
Frequency Response20-20kHz ±0.1dBu (LoZ Mode), 80-20kHz ±0.1dBu (HiZ Mode)
THD+N<0.01% @0dBu in, mid volume; <0.008% @+6dBu in, maximum volume
S/N>110dB
Noise Floor< -70dBu (unmuted), < -110dBu (muted)
Crosstalk< -95dB between channels, maximum volume
Emergency OverrideBalanced 3.5mm Euroblock connector, overriding the normal inputs
Lineout3.5mm Euroblock line level output that follows zone 1, useful for system expansion
Other ControlsCH1/2 Mic/line level, phantom power; high and low impedance settings for each zone; power saving mode and front panel lock
DSPORIGIN advanced multicore platform
EQEach zone has bass and treble shelving control with a low pass filter mode; switchable high pass filter on CH1/2
Power Consumption17W Idle; 150W Typical; 200W Max; 0.4W Standby
Unit Dimensions (Hwd)44 x 483 x 417 mm (1.7" x 19" x 16.4")
Unit Weight3.9kg, 8.6lbs
Carton Dimensions (Hwd)150 x 630 x 510 mm (5.9" x 24.8" x 20.1")
Extern Info