Inogeni Cam200

Plug your HDMI and VGA video sources into the Inogeni Cam 200 4:1 HDMI/VGA Camera Switch with USB 3.0 Output and quickly switch between sources with a less than 0.2 second switching response time. The Cam 200 inputs HD video over HDMI and VGA, and outputs over USB 3.0. Inputs 1 through 3 support HDMI signals up to 1080p60, and the fourth input is a VGA connector that supports VGA and DVI video up to 1920 x 1200. Embedded audio is routed to the output from the selected input (audio follows video). To control the I/O routing, use the simple front-panel controls, or connect a software/hardware control via RS-232 and Ethernet terminals. Scenarios where this switcher would be useful include convention centers, presentation areas, meeting rooms, and more, where HDMI and VGA inputs are necessary, and the video needs to travel via USB 3.0.

Connectivity

• In addition to the front panel selector switches, you can control the CAM200 via Ethernet or RS-232 control.
• You can control the CAM200 via USB 3.0 using the INOGENI Control App, which must be sourced separately.
• Video output is over the USB 3.0 Type-C connector.

Frame BufferThe CAM200 integrates a scaler and frame buffer to ensure a smooth glitch-free switch that provides a continuous data stream, which helps avoid dropouts, black frames, and other glitches that will disturb the program.APP CompatibilityIt has been tested and found compatible with the following:

• Skype
• Quicklaunch
• Hangouts
• ZOOM
• Vidyo
• Livecast
• vMix

DVI

The VGA input will accept DVI signals, but it requires a DVI-I to VGA adapter, which is not included and must be sourced separately.