CCX1226
Product Series: TQ Install
Overview
The CCX1226 is a coaxial, passive subcardioid loudspeaker that
provides 9 dB of low frequency attenuation in the rear hemisphere
while still providing the output capability of a normal 2-way system
in a much more compact enclosure. Its coaxial transducer and 120° x
60° horn can be rotated in 45° increments, which allows its coverage
to be tailored to an application’s requirements. The enclosure’s
vertically trapezoidal shape allows it to be installed very close to
ceilings or beneath large arrays with minimal effect on sight lines.
Its unusually broad pattern is uniquely suited for use as the center
channel in L-C-R systems, to solve difficult fill problems, and in many
other applications.
Fulcrum Acoustic’s TQ™ processing is an integral part of the CCX1226
design. Sound, innovative acoustical design combined with state
of the art digital processing leads to exceptional clarity and precise
transient response, even at very high sound pressure levels. The
required digital signal processing can be provided by one of many
supported platforms.
The CCX1226 is particularly effective in systems where targeted
pattern control is desirable, and is an excellent solution for high
fidelity, foreground distributed systems. Its unique shape and
compact size complements many architectural styles, which
facilitates acceptance by interior designers and architects.
This makes it the perfect choice for houses of worship, theaters,
restaurants, transportation facilities, theme parks, and more.
Performance Specifications
Operating Mode: Single-amplified w/ DSP
Operating Range: 71 Hz to 20 kHz
Nominal Beamwidth (rotatable): 120° x 60°
Transducers
HF/LF: Coaxial 3.0” titanium diaphragm compression driver;
12.0” woofer, 3.0” voice coil; single neodymium magnet
Power Handling @ Nominal Impedance: 57 V / 400 W @ 8 O
Nominal Sensitivity @ Input Voltage 4 (whole space): 103 dB @ 2.83 V
Nominal Maximum SPL (peak / continuous): 135 dB / 129 dB
Equalized Sensitivity @ Input Voltage: 97 dB @ 2.83 V
Equalized Maximum SPL 6 (peak / continuous): 129 dB / 123dB
Recommended Power Amplifier: 400 W to 800 W @ 8 Ohm
Physical Specifications
Connections
(2) Neutrik NL4 Speakon
Pin 1+/-: Full Range
Pin 2+/-: NC
Mounting / Suspension Points
(12) M10 x 1.5 eye bolt angle points, (2) M10 x 1.5 yoke points
Dimensions / Weight
See page 5 on spech sheet
Finish
Black painted enclosure w/ matte black grille, or
White painted enclosure w/ matte white grille
Options
YK-CX12 yoke bracket, Terminal strip input, Custom color finish,
Weather-resistant (WR) enclosure & hardware